Skip to content
RVPowerCalc

Air conditioner soft starter

SoftStartUp Plug and Play RV A/C Soft Start Specs and Sizing

Researched from published standards and manufacturer specifications. Updated .

Quick answer

The SoftStartUp Plug and Play RV A/C Soft Start from SoftStartRV By NetworkRV is a air conditioner soft starter listed around $595.00. Plugs in rather than being wired into the air conditioner, which keeps the job out of the rooftop unit entirely.

This is a specification sheet rather than a review. Every figure below comes from the manufacturer listing, and we do not test products in person. What this page adds is context: what these numbers mean for an RV system, and what else you need to buy alongside it.

Best for: Anyone unwilling to open a rooftop air conditioner.

SoftStartUp Plug and Play RV A/C Soft Start specifications

Published specifications, SoftStartUp Plug and Play RV A/C Soft Start
SpecificationValue
ApplicationRooftop RV air conditioner
InstallationPlug in

Published standard Source: Manufacturer listing. Specifications and pricing change without notice. Confirm on the listing before buying.

What does this component need alongside it?

Check the cable size, the fuse rating and the compatibility with your battery chemistry before installing this component.

How does it compare with other air conditioner soft starter options?

Air conditioner soft starter compared
ComponentPriceNotable spec
SoftStartUp Plug and Play RV A/C Soft Start$595.00application: Rooftop RV air conditioner
SoftStartRV Soft Start Kit$295.00application: Rooftop RV air conditioner
Spartan Power SpartanStart Soft Start Kit$189.00maxBtu: 20000

Published standard Source: Manufacturer listings.

Air conditioner soft starter options

Frequently asked questions

What is the SoftStartUp Plug and Play RV A/C Soft Start best for?
Anyone unwilling to open a rooftop air conditioner. Plugs in rather than being wired into the air conditioner, which keeps the job out of the rooftop unit entirely. Confirm the current specification on the listing before buying, because manufacturers revise these products without changing the model name.
Is the SoftStartUp Plug and Play RV A/C Soft Start suitable for a lithium system?
Check the charge profile before pairing it with lithium. The requirement is a genuine LiFePO4 profile with the correct absorption voltage, not a lead-acid profile with a lithium label. Where a component only charges at lead-acid voltages, a lithium pack will sit permanently short of full.
What size cable and fuse does it need?
That depends on the current it carries and the length of the run, not on the component itself. Work out the current from its rating, then size the conductor for both ampacity and voltage drop with the wire gauge calculator, and fuse it at 125 percent of the continuous load rounded up to the next standard rating.

Wiring safety. Never exceed a conductor's rated ampacity, and always fuse a circuit at or below what the wire can carry, because the fuse protects the wire rather than the appliance. Fuse every positive conductor as close to the battery as practical. Use proper crimped lugs and heat shrink rather than twisted joints, support cable so it cannot chafe through on a frame edge, and keep the battery compartment ventilated. Permanent AC wiring is work for a qualified RV technician or a licensed electrician.